Submissions

Login or Register to make a submission.

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
  • The submission has not been previously published, nor is it before another journal for consideration. The entire content of the article belongs to me and it does not copy exactly other papers. I have indicated the source and I have not reproduced parts or wholes from unauthorized sources.
  • The submission file is in Microsoft Word document file format.
  • Where available, URLs for the references have been provided.
  • The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines.
  • DO NOT WRITE your name or affiliation on the actual paper, as you unable us to achieve the blind peer review process accordingly.

Author Guidelines

The journal does not have article processing charges or submission charges.

The journal allows the author(s) to hold the copyright and to retain publishing rights without restrictions.

MS Word TEMPLATE

 
These instructions are designed for authors submitting final papers and should be read carefully. If they are not adhered to, it could result in delay in publication and/or in sub-optimal reproduction quality.

The abstract should be clear, descriptive and should contain at least 70 and at most 200 words. It should provide a brief introduction to the problem. A statement regarding the methodology should generally follow a brief summary of results. The paper should include results of the presented research. The keywords should have minimum 3 and maximum 5 words which are not contained in the title.
 
1.    Introduction
This author kit is designed to assist authors in preparing their submission. It is an exact representation of the format expected by the editor for the final version of papers. Final submissions not following the required format will be returned to the authors for modification and compliance.
All scientific papers should be written in English including the abstract and the keywords.
 
2.1 General Organization of the Paper
It is recommended that Scientific Papers have explicit sections for Abstract, Keywords, Introduction, Related Work, Problem Statement, Concept and Terms, Solution Approach, Analysis of Results, Conclusions, Future Work, Acknowledgement and References.
A conclusion section is not required. Although a conclusion may review the main points of the paper, do not replicate the abstract as the conclusion. A conclusion might elaborate on the importance of the work or suggest applications and extensions.
 
2.2 Typing Area
The paper size is A4 (210 x 297mm), single-column format with a 2.5 cm margins on the top, bottom, left and right.
The recommended type font is Times New Roman 11pt (on a Macintosh use the font named Times 11pt). Only for tables and figures (illustrations) may you use Helvetica, Universe or other sans-serif fonts. Use Roman as default type and keep italics and/or bold for special text parts.
Lines are single spaced, justified. Standard paragraph has no space before and 6pt after the paragraph.
 
2.3 Writing Style
Usually you should not use the first person singular (I) in your text, write we instead. As a general recommendation, use the first person sparsely, sometimes it can be replaced by a phrase like: This work presents....
 
3. Typographical Style and Layout
 
3.1 Title and Abstract
Centre the title (horizontally) on the page. Leave approx. 1 cm between the title and the names, affiliation and address of authors. Type these information centred. Use for affiliation and address italics.
Type the abstract at a maximum width of 12 cm. Centre the abstract (horizontally) on the page.
 
3.2 Headings
Number section and subsection headings consecutively in Arabic numbers and type them in bold, respectively italics. Keep headings and subheadings always flushed left. Do not include references to the literature, illustrations and tables in headings and subheadings. Keep one blank line above a section heading and one above a subheading. Put one blank line under a section heading and no blank line under a subheading.  Only if you want to emphasize specific parts of the main text, use italics. Otherwise, use Roman.
Headings should be capitalized (i.e., nouns, verbs, and all other words except articles, prepositions, and conjunctions should be set with an initial capital) and should, with the exception of the title, be aligned to the left. Words joined by a hyphen ( - ) are subject to a special rule. If the first word can stand alone, the second word should be capitalized.
 
3.3  Footnotes
The superscript numeral used to refer to a footnote appears in the text either directly after the word to be discussed or – in relation to a phrase or a sentence – following the punctuation mark (comma, semicolon, or period). Footnotes should appear at the bottom of the normal text area, with a line of about 5 cm set immediately above them.
To help your readers, avoid using footnotes altogether and include necessary peripheral observations in the text (within parentheses, if you prefer, as in this sentence). All footnotes must be numbered consecutively (in Arabic numbers) on each page.
 
3.4  Citations and References
Whenever you refer to previously published work, you should set a reference to acknowledge the work you build upon.
References and citations should follow the Harvard System Convention an APA Citation Style. As example you may consider the citation (Smith & Moore, 2008). Besides that, all references should be cited in the text. No numbers with or without brackets should be used to cite or to list the references.
In Microsoft Word use the View | Citations menu option to add citations and Document Elements menu option to add references.
 
3.5 Tables
All tables must be numbered consecutively (in Arabic numbers). Table headings should be placed above the table. Leave no blank line between the table and the caption.
 
3.6 Equations
Equations or formulas are sequentially numbered in numeric fashion with the equation number and the title above the equation. Leave no blank line between the equation and the caption.
In Microsoft Word use the [ Insert | Caption ] menu option to add captions.
 
3.7  Figures
All figures should be centred, except for very small figures (no wider than 7 cm), which may be placed side by side. The fonts inside pictures must be clearly readable. Figures are sequentially numbered in numeric fashion with the table number and the title below the figures.
Place the caption beneath the picture. Leave no blank line between the picture and the caption.

Page Numbering and Running Heads

Do not add any text to the headers (do not set running heads) and footers, not even page numbers, because text will be added electronically.
 
Fine tuning

Do not end a page with a heading or sub-heading. Do not end a page with one or more blank lines, except to avoid ‘widow’ headings and to end your article. Avoid starting a page with an incomplete line. Do not underline headings, sub-headings, title, figure captions and table headings. Keep footnotes to a minimum or else list them in a special section before references.
 
4. Appendix
 
Appendices, if needed, appear before the acknowledgment.
 
5. Acknowledgement
 
Remember to thank those that have supported you and your work. Use the singular heading even if you have many acknowledgments.

 

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.